“The advanced arithmetical machines of the future will be electrical in nature, and they will perform at 100 times present speeds, or more.
Moreover, they will be far more versatile than present commercial machines, so that they may readily be adapted for a wide variety of operations. They will be controlled by a control card or film, they will select their own data and manipulate it in accordance with the instructions thus inserted, they will perform complex arithmetical computations at exceedingly high speeds, and they will record results in such form as to be readily available for distribution or for later further manipulation.”

—  Vannevar Bush, book As We May Think

As We May Think (1945)

Adopted from Wikiquote. Last update June 3, 2021. History

Help us to complete the source, original and additional information

Do you have more details about the quote "The advanced arithmetical machines of the future will be electrical in nature, and they will perform at 100 times prese…" by Vannevar Bush?
Vannevar Bush photo
Vannevar Bush57
American electrical engineer and science administrator 1890–1974

Related quotes

Vannevar Bush photo

“It is a far cry from the abacus to the modern keyboard accounting machine. It will be an equal step to the arithmetical machine of the future. But even this new machine will not take the scientist where he needs to go. Relief must be secured from laborious detailed manipulation of higher mathematics as well, if the users of it are to free their brains for something more than repetitive detailed transformations in accordance with established rules.”

Vannevar Bush book As We May Think

As We May Think (1945)

Vannevar Bush photo

“The needs of business, and the extensive market obviously waiting, assured the advent of mass-produced arithmetical machines just as soon as production methods were sufficiently advanced.
With machines for advanced analysis no such situation existed; for there was and is no extensive market; the users of advanced methods of manipulating data are a very small part of the population.”

Vannevar Bush book As We May Think

As We May Think (1945)

Wassily Leontief photo

“Computers and robots replace humans in the exercise of mental functions in the same way as mechanical power replaced them in the performance of physical tasks. As time goes on, more and more complex mental functions will be performed by machines. Any worker who now performs his task by following specific instructions can, in principle, be replaced by a machine. This means that the role of humans as the most important factor of production is bound to diminish—in the same way that the role of horses in agricultural production was first diminished and then eliminated by the introduction of tractors.”

Wassily Leontief (1906–1999) Russian economist

Leontief (1983) " National perspective: The definition of problem and opportunity http://books.google.nl/books?id=hS0rAAAAYAAJ&pg=PA3", in: National Academies, The Long-term Impact of Technology on Employment and Unemployment: A National Academy of Engineering Symposium, June 30, 1983. p. 3.

“At present the machines are in control and no human values are respected.”

Constantinos Apostolou Doxiadis (1914–1975) Greek architect

Source: Building Entopia - 1975, Chapter 9, The house group, p. 132

Vannevar Bush photo

“Every time one combines and records facts in accordance with established logical processes, the creative aspect of thinking is concerned only with the selection of the data and the process to be employed, and the manipulation thereafter is repetitive in nature and hence a fit matter to be relegated to the machines.”

Vannevar Bush book As We May Think

As We May Think (1945)

Alan Turing photo

“A digital computer can usually be regarded as consisting of three parts: (i) Store. (ii) Executive unit. (iii) Control…. The executive unit is the part which carries out the various individual operations involved in a calculation…. It is the duty of the control to see that… [the table of] instructions are obeyed correctly and in the right order…. A typical instruction might say—"Add the number stored in position 6809 to that in 4302 and put the result back into the latter storage position." Needless to say it would not occur in the machine expressed in English. It would more likely be coded in a form such as 6809430217. Here 17 says which of various possible operations [add] is to be performed on the two numbers…. It will be noticed that the instruction takes up 10 digits and so forms one packet of information…”

Alan Turing Computing Machinery and Intelligence

Computing Machinery and Intelligence (1950)

Gottlob Frege photo

“I hope I may claim in the present work to have made it probable that the laws of arithmetic are analytic judgments and consequently a priori. Arithmetic thus becomes simply a development of logic, and every proposition of arithmetic a law of logic, albeit a derivative one. To apply arithmetic in the physical sciences is to bring logic to bear on observed facts; calculation becomes deduction.”

Gottlob Frege book The Foundations of Arithmetic

Gottlob Frege (1950 [1884]). The Foundations of Arithmetic. p. 99.

Vannevar Bush photo

“Whenever logical processes of thought are employed — that is, whenever thought for a time runs along an accepted groove — there is an opportunity for the machine. Formal logic used to be a keen instrument in the hands of the teacher in his trying of students' souls. It is readily possible to construct a machine which will manipulate premises in accordance with formal logic, simply by the clever use of relay circuits. Put a set of premises into such a device and turn the crank, and it will readily pass out conclusion after conclusion, all in accordance with logical law, and with no more slips than would be expected of a keyboard adding machine.”

Vannevar Bush book As We May Think

As We May Think (1945)

Alan Turing photo

“If one wants to make a machine mimic the behaviour of the human computer in some complex operation one has to ask him how it is done, and then translate the answer into the form of an instruction table. Constructing instruction tables is usually described as "programming."”

Alan Turing Computing Machinery and Intelligence

Computing Machinery and Intelligence (1950)

Related topics